Cleaning out the blade holder

All sorts of fibres, tiny bits of vinyl, lint etc can collect in the blade holder and around the blade which can cause cutting problems.

Here’s how I clean my blade holder:

1) Twist the bottom piece anti clockwise until it comes off.  Be careful of your fingers, children, pets etc with the sharp exposed blade.




2) Give the inside of the blade holder, and the blade iteself a careful go over with a pipe cleaner.  The pipe cleaner magically attracts all the fibres and lint.  I also take this opportunity to give the blade a check over under a magnifying glass for any nicks.


3) Put the blade holder back together again and you’re ready to go! 🙂


Please note: this post is to help ScanNCut users ONLY.  I do NOT give permission for any shopping channel or shopping channel demonstrator, or presenter to mention this tip on or off air as I do not agree with their sales tactics.  Thank you.

Leave a Reply

Please log in using one of these methods to post your comment: Logo

You are commenting using your account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s