I have just seen a post from Makers Superstore that they have the roll feeder 2 and spare leader sheets in stock! (As with the original roll feeder, this accessory is for SDX machines only). Now we can cut rolls of heat transfer vinyl as well as self adhesive vinyl! 🙂
What’s the difference between the original roll feeder and the new one?
Here is the information from the official Brother website 🙂
Reverse it – now you can use reverse rolled, as well as forward rolled materials on your Roll Feeder II, such as heat transfer vinyl.
In the thick of it – you can now cut materials from 0.15 mm up to 0.5 mm thick on the roll feeder II (roll feeder I range 0.21 mm – 0.35 mm).
Easier feed for reverse rolled and more delicate materials with the included Leader Sheet.Compatible with ScanNCut DX range only – please check Brother Solutions Center for compatibility.
Ok so I have thought long and hard about posting this video…but I’m going to do it. As you know, I love to help out other people with their ScanNCut, and am very community minded, and make videos in my free time to help others out as well as doing Facebook Lives for free.
I still have all my YouTube videos (I keep them backed up in several places) and am still deciding on the best place to re upload them to….so I’ll keep you updated on that.
I have several new tutorials coming out shortly, so I’ll keep you updated on those as well. As soon as I’ve decided on the appropriate platform (I still have full access to YouTube, so may upload them there), I’ll post links 🙂
I’ve uploaded the video as Create and Craft are still misleading customers over the ScanNCut (Dean Wilson claimed on today’s weekender show the CM900 is still being updated when in fact the CM900 was discontinued by Brother in September 2020..if you want to check with Brother, I highly suggest you do that because as you know, I am passionate about making sure we all have the most accurate information..
I don’t like Create and Craft misleading customers, and getting my YouTube channel deleted just shows them in a very unpleasant light. This isn’t the only unpleasant thing they have done…they have attacked other people in the past – see this article..before anyone says it’s a coincidence…it isn’t….I’ve had to make crosswords for magazines in the past, and the software prevents any offensive or swear words from appearing in the article.